Skip to main content

Both the Thunder | Core Series, Penta Series and AX32 comes with the ability to install optional expansion cards and/or modules. Here is an overview of the current expansion options available.

128 ch Dante/AES67 Interface

  • 128 Channels in and out
  • 8 cards = 1024 channels
  • Built-in Sample Rate Converter
  • Enables connection between unsynchronised
  • Dante/AES67 networks
  • Enables connection between networks with different sample rates
  • Support for Dante Domain Manager
  • Support for AES67 with SAP
  • Network delay setting up to 21 msec.

Dual MADI Interface

  • 2 x MADI I/O
  • 2 x 64 channels
  • 8 cards = 1024 channels
  • Built-in Sample Rate Converter on input
  • Choice of physical interface
  • Select type of SFP module
  • Optical, MM or SM
  • Coax
  • Redundant mode
  • Auto switch-over in case of signal loss

Analog Inputs

  • Two card types
  • 8 ch. LINE input
  • 8 ch. MIC/LINE input
  • Cards are physically identical
  • LINE card can be upgraded to MIC/LINE by license
  • MIC/LINE card provides:
  • Phantom power
  • Mic pre gain
  • Phase invert
  • Selectable max. line input level
  • +9 dBu to +30 dBu in steps of 0.1 dB

Analog Outputs

  • 8 ch. LINE output
  • Selectable max. Output level
  • +9 dBu to +24 dBu in steps of 0.1 dB

8 AES Interface

  • 8 x AES I/O
  • 16 channels in and out
  • 8 cards = 128 channels in and out
  • Built-in Sample Rate Converter on input
  • Sample rates from 44.1 to 192 kHz

Dual SDI Embedder/De-Embedder

  • 2 x SDI Embedder/de-embedder
  • 16 channels pr. SDI
  • 8 cards = 16 SDI Embedder/de-embedder
  • Supports SD, HD and 3G SDI
  • Built-in Sample Rate Converter
  • Routing of single channels

SPQ Processor

  • Programmable delay for up to 128 ch.
  • Individual delay pr. channel
  • 128 ‘channel-seconds of delay’
  • 128 ch. can be delayed up to 1 sec.
  • 1 ch. Can be delayed up to 128 sec.
  • Or any combination in-between
  • Delay can be set in steps of 1 sample
  • Suitable to achieve lipsync

Dante/AES67 Module

  • 64 ch. Dante interface
  • Support for AES67 with SAP
  • Support for Dante Domain Manager
  • Network delay setting up to 41 msec.

Dual MADI Module

  • 2 x MADI I/O
  • 2 x 64 channels
  • Choice of physical interface
  • Select type of SFP module
  • Optical, MM or SM
  • Coax
  • Redundant mode
  • Auto switch-over in case of signal loss
  • Can operate as dual HotLink
  • 2 x 128 ch.

 

  • SFP/LC – Opt module multi mode 1300 nm low output LED / 647-110
  • SFP/LC – Opt module single/multi mode 1300 nm, laser / 647-200
  • SFP – Coax MADI tranceiver w. HD/mini-BNC / 647-400